Local Mazdaspeed3 Custom Tuning Day with the COBB AccessPort

**Click Here for more information or to book your own custom tune (local as well as from anywhere in the world)**

Stratified had an early fall tuning day with a couple of local Mazdaspeed3 cars here in Vancouver, BC. The weather cooperated and everyone had a great time. It was such a great time that we had some unexpected visitors join us – the famous Tuning Cats!

Actually the poor creatures were homeless and we made sure they were picked up by the local SPCA before the day ended. A win for everyone!

Now on to the tuning. Vancouver and the Lower Mainland unfortunately suffer from some of the poorest gas quality in North America in terms of octane. Although stations here sell “94 octane” fuel, it is actually poorer than the 91 octane found just over the border. It is really a shame that we pay 30% more on top of this but I digress.

What this means in terms of tuning is that it’s an exercise in knock management. Off the showroom floor the Mazdaspeed3 vehicle will pull about 4 degrees of timing STOCK in the lower mainland due to this. A COBB Off the Shelf (OTS) map that is considered conservative will rattle the engine on the local gas and this is both dangerous and detrimental to performance. While these cars would be able to pick up 20whp easily with different gas, they were tuned for peak performance while also staying below the knock threshold. These cars were also on the stock high pressure fuel pumps so we had to be careful with this as well. It’s not great making less power, but it’s even worse having to buy a new engine!

The results were consistent for these mildly bolted MS3s (TMIC, COBB AP, Intake, TIP) and the owners left content with smooth power bands and cars they know they can safely “romp on” from here on out even with the stock cam driven high pressure pump (CDFP/HPFP) and our sub-part fuel. Click on the virtual dyno graph below to enlarge.

Click Here for more information or to book your tune (local as well as from anywhere in the world).

Happy Tuning,

The Stratified Team

Mazdaspeed3 and Mazdaspeed6 Tuning!

Mazda has delivered an excellent package with the Mazdaspeed3 and Mazdaspeed6 cars. They are powerful, can handle, and look great! Since they are turbocharged, a lot of buyers want to extract the power that is so easily accessible with turbocharged vehicles. Adding a down pipe, better intercooling, a bigger turbo are all common modifications.

Stratified Mazdaspeed Tuning

However, without properly tuning the complex Mazda ECU, not only does the car not perform to its potential, but the motor can also be put in danger. Through the availability of a very powerful tuning tool – the COBB AccessPort – and our control systems and tuning expertise we teamed up with PERM tuning and are able to help you achieve a custom tune for your exact vehicle and for your modifications, climate, and fuel quality that improves on both stock and off-the shelf/canned tunes.

What’s better – the process doesn’t even require you to get to the dynamometer because the Mazda ECU is powerful enough so that all the tuning information necessary can be extracted during normal driving. (You can of course hop on the dyno to check the results at any time).

This applies to any 2006-2007 Mazdaspeed6 and 2007-2011 Mazdaspeed3.

For more information Click Here.

Happy Tuning,

The Stratified Team

Instructional Videos for our Megasquirt Plug and Play Systems

We realize that if a picture is worth a thousand words – then a video must be … well you get the idea. We plan on augmenting our site with instructional videos that hopefully make it easier to see what the products do, how to set them up etc.

To start off, there is some confusion about what our GENERIC Megasquirt Plug and Play does compared to the vehicle specific ones.

Well, the GENERIC unit is exactly the same as the vehicle specific units – however, the connections have not been made inside to match to the OEM wiring of that particular vehicle.

The first video shows how to go about making those connections and making the GENERIC unit vehicle specific. In this case, we wire it up for a KL Powered Mazda MX-6. This shows you how easy it is to do and how you can save ($140 in this case) by doing this yourself.

A software setup video will follow.

Any questions, please Contact Us as usual

Happy Tuning, The Stratified Team

1990-1997 Mazda Miata Plug and Play Megasquirts Released

1990-1997 Mazda Miata Megasquirt Plug and Play PNP

1990-1997 Mazda Miata Megasquirt Plug and Play

We believe in giving you the tuning tools built for your vehicle so that you can get to the good stuff as soon as possible without any wiring hassles! To follow up with more Mazda models, we released the Fully Assembled Megasquirt Plug and Play Standalone ECUs for the Mazda Miatas in the years listed below. Click the links for prices and details.

1990-1993 Mazda Miata Megasquirt Plug and Play
1994-1995 Mazda Miata Megasquirt Plug and Play

1996-1997 Mazda Miata Megasquirt Plug and Play

These are our in-house designed boards that exploit the full capabilities of the Microsquirt (Megasquirt II) processor. As always, the units are fully built and tested by us and come with a startup/base map installed and our renowned one-on-one customer service and support until your vehicle is running. We also offer tuning support/services beyond this if you desire.

We are also looking for feedback from you on what other Plug and Play models to create. Any question or comments, please Contact Us!

Happy Tuning, The Stratified Team

Mazda MX-6, MX-3 and Ford Probe KL Megasquirt Plug and Play

92-95 mazda mx-6 v6 Megasquirt Plug and Play

92-95 mazda mx-6 v6 Megasquirt Plug and Play


We have received quite a few requests to develop full plug and play standalone ECUs based on the Megasquirt II (Microsquirt) platform for the excellent K series Mazda/Ford engines and we have delivered!

We cover the following models:
1992-1995 Mazda MX-6 2.5l V6 (KLDE, KLZE)
1992-1995 Ford Probe 2.5l V6 (KLDE, KLZE)
1992-1995 Mazda MX-3 1.8l or 2.5l V6 (K8, KLDE, KLZE)

92-95 ford probe v6 Megasquirt Plug and Play

92-95 ford probe v6 Megasquirt Plug and Play


The ECUs are fully assembled, tested, loaded with the base maps and ready to plug into your stock wiring harness. They also feature:

– Full control of fueling no matter what injector size you run
– Full control of ignition timing
– Full control of the two stage VRIS
– Launch control/Flat shift
– Full control of the fans
– A/C functionality
– Boost controller solenoid driver if your car has forced induction
– Our easy to use interface for adding external peripherals such as wideband sensors, external IATs, boost control solenoids etc.

Contact Us with any questions and as always –
Happy Tuning!

The Stratified Team