The Options
Added Parts:
Bolt-on parts such as intakes, exhausts, intercoolers, and blow-off valves/by-pass valves are included in the base price. Only WMI kits have an added cost. WMI tunes come with complimentary Datalog Refinements at no extra charge.
Fuel Configuration:
Supports 91OCT/95RON to 94OCT/98RON, E30. Unique fuel types and mixtures such as race gas, octane booster, etc. will require a ProTune.
STuned Crackles:
This feature adds crackling/burbling sounds to your exhaust when lifting off the throttle and coasting down in gear. The frequency and intensity of the sounds highly depend on your current engine speed during lift-off and most importantly: YOUR EXHAUST SETUP.
When crackles are purchased a separate TUNE FILE is sent containing the crackles.
This additional TUNE FILE can be used to Enable/Disable crackles. You must reflash from your original tune to the additional tune and vice versa.
**We have not tested all exhausts for sound quality nor do we have any data on the long-term effects of this feature on the catalytic converter. However, we have found that exhaust gas temperatures have stayed relatively the same and catalytic converter temperatures had no significant increase compared to having no crackles.**
Datalog Refinement:
Purpose:
- Enhance the performance of your Flash Tune IF AND ONLY IF there is leeway or headroom, OR make adjustments based on datalogs to ensure your car operates safely with your local fuel and particular environment using a SINGLE tune iteration.
- To report if there are any issues and make suggestions on how to correct them (swapping parts, repairing leaks, changing fuel)
- If your car runs optimally on your local fuel or a particular environment, you will receive a full report on its performance.
** DISCLAIMER **: ALL CHANGES WILL BE BASED ON THE DATALOGS RECEIVED AND OUR EXTENSIVE EXPERIENCE AND EXPERTISE (THIS MEANS THAT WE WILL EITHER INCREASE PERFORMANCE OR MAKE ADJUSTMENTS FOR ENGINE SAFETY). AS SUCH, WE CANNOT AND WILL NOT GUARANTEE THAT PERFORMANCE WILL ALWAYS BE ADDED.
For more information click here
Datalog Refinement Update:
This allows us to import any changes based on a previous Datalog Refinement to your new updated tune. Please ensure to enter the correct order number associated with the Datalog Refinement that you want your updated tune to be based on.
Misc. Features:
Flat Foot Shifting: Flat Foot Shifting, also referred to as “No Lift Shift”, enables drivers of manual transmission cars to keep the accelerator pedal planted during shifts when every MPH or tenth of a second is important. This feature helps to minimize shift times and keeps boost from falling off between gears. After the appropriate Flat Foot Shift RPM Limit has been dialed in, the ECU will help to hold RPMs at that level when the clutch is depressed.
Launch Control Settings: Both Manual and DSG cars are able to select one of 6 Launch Control slots which will have pre-determined RPM limits. You may need to experiment with different slots based on your vehicle configuration. Factors such as tires, suspension, and how much torque the car makes all come into play when trying to get off the line most efficiently. Launch Control also features a Load Offset for use when a bit more power may be necessary off the line. For example, when using a drag radial on a prepped surface a car may be more prone to bogging during a launch. Increasing the Load Offset allows some adjustment for dialing in power on tap. The adjustment range for this feature is between 0% and 100%.
Fault Code Adjustments: We can adjust any non-emissions related check engine light codes that may arise from modifications.
Rev Limiter Change: Limit how high your car can rev for any RPM of your choice. Specifics will be asked in the tuning form after you place an order.
Brake Boost: This allows the brakes to be applied at the same time throttle is applied. This allows the user to build boost without accelerating; perfect for roll races!
