Product 2/9
ATP Garrett Intercooler (2012+ Focus ST 2.0L Ecoboost)

ATP Garrett Intercooler (2012+ Focus ST 2.0L Ecoboost)

$702.00USD
Item is in stock

Description

** The price for this kit includes free shipping within the continental USA**.

Stratified Notes: 

One of the first things to upgrade on a turbocharged car like the ST is the intercooler. This is because it serves several purposes. One, it cools the charge air more increasing the efficiency of the air charging system and that results in more power, and for longer since the ECU does not have to pull back performance from a heating air charge. This in turn also helps reduce knock. Finally, with a higher flow rating than OEM, the pressure drops across this intercooler is lower and that means the turbocharger will work more efficiently. The quality, fit and finish on this IC are great and it remains relatively lightweight.

Description: 

NEW Garrett® Intercooler upgrade for the 2012+ Ford Focus ST 2.0L Ecoboost

The Garrett® direct fit Ford Focus ST performance charge air cooler boasts a 115% larger core that helps reduce intake manifold temperatures by an average of 11 deg. F (6.1 deg. C) based on OBD II data. Optimized end tanks improve air flow through the core. This performance intercooler showed an increase of up to 25 HP (19 kW) and 9 lb-ft (12 N-m) of torque compared to OE during back to back dyno comparisons in a wind tunnel which generates air velocity that matches vehicle speed. During testing the heat saturation point increased from 4 dyno pulls to 8 dyno pulls.

This direct fit performance intercooler installs in 1.5 hours and can support up to 670 HP (499 kW) all while reusing the stock bolts, hoses, and clamps. This intercooler also features an integrated drain plug to allow removal of condensation buildup.

Features: 

  • Supports up to 670 HP (499 kW)
  • 115% larger core than stock
  • Installs in stock location
  • Up to 25 HP (19 kW) and 9 lb-ft (12 N-m) of torque
  • Average 11 deg. F (6.1 deg. C) reduction in intake temperature based on OBD II data
  • Integrated drain plug to evacuate condensation
  • Cast aluminum end tanks
  • Advanced offset fin design
  • Bar-and-plate construction
 
 
 
 
 
 
**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase**
 

 

 

 

 

 

Features

  • Model: ATP_880736-6001
  • Shipping Weight: 15.5kgs
  • 6 Units in Stock

Reviews

Be the first to write review.