Stratified Notes:

This is a track oriented pad, not recommended for the street. They should be paired with the HP+ rear pads for a race track day.

Description:

Tune your brake system for a winning day at the track with Hawk DTC Racing Brake Pads. Using Dynamic Torque Control (DTC) technology to provide a more aggressive braking performance, these quality racing brake pads are developed and manufactured for your track use only.

The DTC series is designed with advanced friction technology to fight pad edge lift under even the most extreme racing conditions. Track-tested to ensure highly controllable and consistent torque, these Hawk Racing Brake Pads are the ideal way to give your speed machine the stopping power it demands.

Note: All brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Bed-in Instructions:

After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.

Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.

DO NOT DRAG BRAKES!

Allow 15 minutes for brake system to cool down.

After step 4 your new pads are ready for use.