Free shipping within the continental USA!
Description:
Torque Recommendations (Measured at the Flywheel):
| |
Stage 1 |
Stage 2 |
Stage 2+ |
Stage 3+ |
| Kit Part Number |
SZ881 |
SZ882 |
SZ883H |
SZ883F |
| Torque Capacity (lb-ft) |
303 |
345 |
387 |
477 |
*
Clutch Kit Notes: These clutch kits are self-ratcheting and can be used with an original dual mass or the
aluminum SZ03A flywheel.
About SPEC Clutch: SPEC is a Manufacturer of street high performance and racing clutches and flywheels. Featuring Clutch Kits From street kit Stage 1, 2, 2+, 3, and 3+ to Race Kits Stage 4 and 5. And now the SPEC Super Twin with TQ ratings of over 1500 FT TQ ! Every SPEC Clutch Kit and Flywheel has been SFI Approved.
Stage 1: Street, Drag, Drift, Road Race, Rallye, Pulling, Autocross
Stage 1 Clutch Kits feature an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub comes in either Sprung or Rigid and is application dependant. The double sprung hud features spring cover relieves for flexibility and both hubs use heat treated components for strength and durability. Best for street and many track/off-road applications.
Stage 2: Street, Drag, Pulling, Autocross
Features segmented or full faced pure Kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity. The hub comes in either Sprung or Rigid and is application dependant. The double sprung hud features spring cover relieves for flexibility and both hubs use heat treated components for strength and durability. Best for street, drag, pulling and autocross.
Stage 2+: Street, Drag, Pulling, Autocross
Features a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub comes in either Sprung or Rigid and is application dependant. The double sprung hud features spring cover relieves for flexibility and both hubs use heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rallye and drift.
Stage 3+: Street, Drag, Pulling, Autocross
The flagship stage for a high powered street or race car that requires a manageable and friendly engagement, the stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The hub comes in either Sprung or Rigid and is application dependant. The double sprung hud features spring cover relieves for flexibility and both hubs use heat treated components for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rallye and drift.
**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase.
Any further questions - please feel free to Contact Us.
