What is the HPTuners MPVI3?

• Connect > It is an OBDII interface tool that connects VCM Suite to your vehicle’s various control modules.
• Read > Diagnose and clear trouble codes, monitor vehicle performance or read from your various vehicle control modules.
• Edit > Optimize vehicle performance, fuel economy, and more.
• Write > License and tune any vehicle currently supported by HP Tuners.
• Drive >>>>>

Note: The MPVI3 does not include any pre-loaded tunes or calibrations.

Unlike the RTD the MPVI3 allows user to edit their own tune files as well and is not just a tool for reading and writing tunes but also editing.

New Features include:

• Bluetooth Low Energy 5.0
• M8 motorsports-grade screw-on connector
• 12x Faster USB-C
• RGB LED
• 8Gb of storage
• Comes standard with pro feature set.

Hardware & Software

Combine the MPVI3 With VCM Suite for the most comprehensive scanning, logging and calibration tools on the market. Whether you are building a dedicated track car, a next-level streetcar, or just want more fuel efficiency or better towing for your daily driver, HP Tuners has the tools to get the most out of your vehicle.

Tune Credits

Note that you need to purchase tune credits along with the tuning device. Credits are not vehicle-dependent.

The number of credits required to flash each vehicle is dependent on the vehicle and if you are flashing ECU and/or TCU.

For example, a Mk6 GTI requires 4 credits to flash the ECU, and 4 credits to flash the TCU totalling 8 credits required to flash both the ECU and the TCU.

For other applications please refer to HP tuners supported vehicle list here.

PROLINK+ for MPVI2+ and MPVI3 (Optional)

Designed specifically for MPVI2+ and MPVI3, the PROLINK+ cable allows professional users to input 2x analog signals (from a wideband sensor, map sensor, boost pressure sensor etc.) and 1x CAN bus signal simultaneously.